Here are Samsung MultiXpress SCX-8811CO drivers for Mac OS. You may download and install them to make your MultiXpress printer work correctly.
 |
| Samsung MultiXpress SCX-8811CO |
Samsung MultiXpress SCX-8811CO has a width of 26.7 inches, a depth of 29.2 inches, and a height of 36.4 inches. This printer machine is powered by up to 1 GHz with 320 GB HDD. It's also equipped with the standard internal memory size reaching up to 2 GB for high speed.
Also, update: Samsung MultiXpress SCX-8811CO Driver for Windows
Samsung MultiXpress SCX-8811CO Toner Cartridge: Samsung D709 Black Toner Cartridge (MLT-D709S/ ELS).
Key Features
- Print/ Scan/ Copy/ Fax
- 2 GB RAM
- 320 GB HDD
- 1 GHz processor frequency (dual-core)
- Up to 40 ppm print speed
- Up to 40 ipm scan speed
- 300 dpi scan resolution
- First-time operation less than 5.5 seconds
- Full color with 10.1-inch LCD
The Benefits
- Top-quality output with impressive speed
- Supports HCF, DCF, and standard finisher (1K)
- The control panel has a significant interface screen of liquid crystal display
- Duplex Automatic Document Feeder (DADF) that runs at a nice speed
- Open architecture for the magnificent experience of users
Samsung MultiXpress SCX-8811CO Mac OS Compatibility
- macOS 14 Sonoma
- macOS 13 Ventura
- macOS 12 Monterey
- macOS 11.00 Big Sur
- macOS 10.15 Catalina
- macOS 10.14 Mojave (Liberty)
- macOS 10.13 High Sierra (Lobo)
- macOS 10.12 Sierra (Fuji)
- Mac OS X 10.11 El Capitan (Gala)
- Mac OS X 10.10 Yosemite (Syrah)
- Mac OS X 10.9 Mavericks (Cabernet)
- Mac OS X 10.8 Mountain Lion (Zinfandel)
- Mac OS X 10.7 Lion (Barolo)
- Mac OS X 10.6 Snow Leopard
- Mac OS X 10.5 Leopard (Chablis)
- Mac OS X 10.4
How to Install Samsung MultiXpress SCX-8811CO Driver without an Installation Disk
This section will show you how to install the Samsung MultiXpress SCX-8811CO printer driver on a computer running on Mac OS/ macOS properly in the absence of an installation disk.
- First off, make sure the printer is compatible with the version of the Mac OS/ macOS currently running on your device. You can find details about this in your printer’s manual.
- Get on the website of the printer’s manufacturer to discover supports for the model you own.
- Go to the printer section of the manufacturer’s website. If things get overly complicated for you, just type in the model of the Samsung printer you own.
- Locate the link provided on the page for you to download the software required by the Samsung MultiXpress SCX-8811CO printer you own.
- Click on the download link to begin downloading process automatically.
- If necessary, determine the location on your computer to save the downloaded software later on. Wait while the download commences.
- Go to the download folder and double-click on the downloaded file.
- Look for the setup file (typically in DMG format) and double-click on the file to run it.
- Further instructions will be given onscreen. Make sure you follow all the given instructions.
- Connect the Samsung MultiXpress SCX-8811CO printer to your Apple computer. Use the USB cable to check if your Apple computer recognizes the printer. Alternatively, connect the two via Wi-Fi but make sure both your computer and the printer are connected to the internet properly.
- Your Samsung MultiXpress SCX-8811CO printer should be readily accessible by now.
Samsung MultiXpress SCX-8811CO Printer Driver Uninstallation Method
Manual Uninstallation:
- End all processes of Apple Samsung Printer Drivers by accessing Activity Monitor.
- Go to Launchpad, find Utilities, and open Activity Monitor. Select All Processes off the dropdown menu and select all processes related to Apple Samsung Printer Drivers. Click the Quit Process option and select Quick.
- Use the Trash to delete the application of Apple Samsung Printer Drivers.
- Go to Finder and delete everything associated with Apple Samsung Printer Drivers.
- Remove Apple Samsung Printer Drivers completely by emptying the Trash.
Uninstallation with MacRemover:
- Download the MacRemover app and drag its icon to the app folder to install it.
- Run the app and choose Apple Samsung Printer Drivers. Click Run Analysis.
- Locate the files or folders of Apple Samsung Printer Drivers
- Select Complete Uninstall and select Yes.
Driver Installation for macOS 10.15 (Catalina)
- Click here to download the latest driver available for the Samsung MultiXpress SCX-8811CO printer
- Make sure to select the correct Mac OS version (10.11/ 10.12/ 10.13/ 10.14) for Mac O.S 10.15. You can select Mac OS 10.14 or 10.11 or 10.13 or later
- Download the driver of the Samsung MultiXpress SCX-8811CO driver
- After that, open the folder where located of the download file is and Click to open the driver file
- If you get the following error message when running it, the gatekeeper needs to be temporarily disabled.
- You need to open the terminal from spotlight
- Type the command: sudo spctl --master-disable
- Enter the correct password and run the printer driver with the extension".pkg" again.
- Once the print driver has been installed, just open the Samsung MultiXpress SCX-8811CO Driver with the following
folder path and then install the following PKG drivers (ICDM, ScanThru):
- ScannerDriver > Mac_Installer > MAC_ICDM > ICDM.pkg
- ScannerDriver > Mac_Installer > MAC_TWAIN > ScanThru.pkg
- After the drivers are installed, you can go to System preferences > Printers & scanners and add the printer by clicking on the plus (+) button > Add printer or scanner > Samsung MultiXpress SCX-8811CO
- Make sure to select the specific driver and not AirPrint where it says "USE"
- Now, that the Samsung MultiXpress SCX-8811CO printer has been added, you should be able to print or scan. If you want to scan, go to system preferences > printers and scanners > and select scan
- Enable gatekeeper (Mac security):
- Open terminal from the spotlight
- Typing the command: sudo spctl --master-enable
- Enter your password
Driver Installation on macOS 11 (Big Sur)
- Workaround for (some) printers working with Catalina
- Install Catalina again
- Install the printer
- Then update to Big Sur
- Kept my Samsung driver installed and still works in macOS 11 Big Sur
Driver Installation on macOS 12 (Monterey)
- Workaround for (some) printers working with macOS 11 Big Sur
- Install macOS 11 Big Sur again
- Install the Samsung MultiXpress SCX-8811CO printer
- Then update to macOS 12 Monterey
- Kept the Samsung MultiXpress SCX-8811CO driver installed and still works in macOS 12 Monterey
Driver Installation on macOS 13 (Ventura)
Workaround for (some) printers working with macOS 12 (Monterey). Follow the steps below:
- Install macOS 12 (Monterey) again
- Install the Samsung MultiXpress SCX-8811CO printer
- Then update to macOS 13 (Ventura)
- Kept the Samsung MultiXpress SCX-8811CO driver installed and still works in macOS 13 (Ventura)
Driver Installation on macOS (14 Sonoma)
Workaround for (some) printers working with macOS 13 Ventura. Follow the steps below:
- Install macOS 13 Ventura again
- Install the Samsung MultiXpress SCX-8811CO printer
- Then update to macOS 14 Sonoma
- Kept the Samsung MultiXpress SCX-8811CO driver installed and still works in macOS 14 Sonoma
You might need: Samsung MultiXpress SL-X4300LX Driver for Mac
If you want to download the Samsung MultiXpress SCX-8811CO driver for Mac OS/ macOS, you must click on the "Download" links that we have provided in the table below. If you find any broken link or some problem with this printer, please contact our team by using the contact form that we have provided.
| Operating System | Ver/Size | Action |
|---|---|---|
| MultiXpress SCX-8811CO Series Print Driver Mac OS X 10.9/ 10.0/ 10.4/ 10.5/ 10.6/ 10.7/ 10.8 | V1.17/ 6.8 MB | Download |
| MultiXpress SCX-8811CO Series Scan Driver Mac OS X 10.9/ 10.0/ 10.4/ 10.5/ 10.6/ 10.7/ 10.8 | V2.31/ 49.5 MB | Download |
| MultiXpress SCX-8811CO Series Universal Print and Scan Driver for Mac OS X (10.9 Mavericks/ 10.8 Mountain Lion/ 10.7 Lion/ 10.6 Snow Leopard) | V2.6/ 18.74 MB | Download |
| MultiXpress SCX-8811CO Series Print Driver for macOS | V1.1/ 25.6 MB | Download |
| MultiXpress SCX-8811CO Series Print and Scan app (3rd-party for macOS) | V4.0.5 | Download |
| MultiXpress SCX-8811CO Series Manual Print and Scan Driver for macOS | - | View |