Versatility is the key with the Samsung SCX-4828 5-in-1 Monochrome Laser Printer. This workplace workhorse can publish, duplicate, scan, fax, as well as PC-fax easily as well as conveniently. The SCX-4828 supplies high efficiency as well as optimum speed functional enough for an expert workgroup.
Samsung SCX-4828
This multi-functional gadget features a network connection, and also a front USB port to enable printing documents from and also scanning directly to a USB flash drive. It refines as much as 50,000 pages a month, at quicken to 30ppm. The SCX-4828 includes a compact impact and also a low noise degree.
A straight connectivity port on the SCX-4828 permits users to publish and also check records merely through a USB memory drive (optional). This beneficial attribute allows the individual to separate the printer from the Personal Computer, scan papers, and also conserve them to the USB memory device, print information kept on the USB tool, back-up or recover data as well as system setups.
Which Toner Cartridges Supported for Samsung SCX-4828?
Compatible Samsung 2092L High Capacity Black Toner Cartridge (MLT-D2092L/ELS) - 0.8p per page up to 5,000 pages
Samsung 2092L High Capacity Black Toner Cartridge (MLT-D2092L/ELS) - 1.6p per page up to 5,000 pages
Samsung 2092 Black Toner Cartridge (MLT-D2092S/ELS) - 2.8p per page up to 2,000 pages
What Benefits of Samsung SCX-4828 Printer?
USB Direct Printing and Scanning
5-In-One Functionality
Network Capable
Fax to PC
Fast Printing and Copying
Built-In Automatic Duplexer
Easy-to-Use Controls
PostScript Support
Productivity Options
Quiet and Compact
What Mac Versions Do You Need for Samsung SCX-4828 Driver?
macOS 11.00 Big Sur
macOS 10.15 Catalina
macOS 10.14 Mojave (Liberty)
macOS 10.13 High Sierra (Lobo)
macOS 10.12 Sierra (Fuji)
Mac OS X 10.11 El Capitan (Gala)
Mac OS X 10.10 Yosemite (Syrah)
Mac OS X 10.9 Mavericks (Cabernet)
Mac OS X 10.8 Mountain Lion (Zinfandel)
Mac OS X 10.7 Lion (Barolo)
Mac OS X 10.6 Snow Leopard
Mac OS X 10.5 Leopard (Chablis)
How to Install Driver for Samsung SCX-4828?
For your printer to work correctly, the driver for the printer must set up first. You must follow the guide provided below on a device running on Mac OS.
Turn on the printer.
If your printer is connected to the computer with a USB cable, disconnect the cable from the printer. The software installation prompts you to connect the cable if needed.
Click on the Download button on this page driver for Mac, make sure it matches the operating system you have been used.
Click the downloaded file. The file will be extracted and the installation process will automatically start.
Follow the on-screen instructions Install to proceed with and complete the installation.
Finish, Test Print Test Page.
How to Install Printer Driver for macOS 10.15 (Catalina)
Click here to download the latest driver available for the Samsung SCX-4828 printer
Make sure to select the correct Mac OS version (10.11/ 10.12/ 10.13/ 10.14) for Mac O.S 10.15. You
can select Mac OS 10.14 or 10.11 or 10.13 or later
Download the driver of the Samsung SCX-4828 printer
After that, open the folder were located for the download file and Click to open the driver file
If you get the following error message when running it, the gatekeeper needs to be temporally
disabled.
You need to open terminal from spotlight
Type the command: sudo spctl --master-disable
Enter the correct password and run the printer driver with extension".pkg" again.
Once the print driver has been installed, just open the Samsung SCX-4828 Driver with the following
folder path and then install the following PKG drivers (ICDM, ScanThru):
After the drivers are installed, you can go to System preferences > Printers & scanners and add the
printer clicking on the plus (+) button > Add printer or scanner > Samsung SCX-4828
Make sure to select the specific driver and not AirPrint where it says "USE"
Now, that the Samsung SCX-4828 printer has been added, you should be able to print or scan. If you want to scan, go to
system preferences > printers and scanners > and select scan
Enable gatekeeper (Mac security):
Open terminal from the spotlight
Typing the command: sudo spctl --master-enable
Enter your password
Note: Click "View" at the bottom of the table for detail.
What Clue Do You Need If The Driver Not Working with macOS Big Sur?
Workaround for (some) printers working with Catalina
install Catalina again
install the printer
then update to Big Sur
Kept my Samsung driver installed and still works in Big Sur
If you want to download a driver or software for Samsung SCX-4828 to Mac OS, you must click on the "download" links that we have provided in the table below. If you find any broken link or some problem with this printer, please contact our team by using the contact form that we have provided.
Driver Type
Version
Action
SCX-4828 Series Print and Scan Driver for macOS 10.15 (Catalina)/ macOS 11.00 (Big Sur)
SCX-4828 Series Print Driver for Mac OS X 10.0 / Mac OS X 10.4 / Mac OS X 10.5 / Mac OS X 10.6 / Mac OS X 10.7 / Mac OS X 10.8 / Mac OS X 10.9 / Mac OS X 10.10 / Mac OS X 10.11 / macOS 10.12 / macOS 10.13 / macOS 10.14
