Samsung SCX-4300 Flash Review

Samsung SCX-4300 is a printer from Samsung that has multifunction for printing, scanning, and copying. This printer uses laser monochrome printing technology and this has a monthly duty cycle for a max of 10,000 pages. This has also been displayed for 2 lines and 16 characters. For connectivity technology, this is only supported by a wired connection using USB 2.0.

Samsung SCX-4300 Driver Download for Mac

Sorry, this item is discontinued. Replaced by HP LaserJet MFP M234sdw

From printing capability, this Samsung SCX-4300 printer is capable of printing with a maximum resolution of up to 600 x 600 dpi. In printing speed, this can print up to 19 pages per minute. This can handle media size with the maximum Legal size and it has the capacity for 250 sheets and an output tray for 50 sheets.

See also: Samsung SCX-4300 Driver Download for Windows

Key Features

8MB RAM
Print / Scan / Copy
Samsung Printer Language (SPL)
USB Connection
Up to 18ppm Mono Print
600 x 600 dpi Print
4,800 x 4,800 dpi Scan
600 x 600 dpi Copy
250 Sheet Input Tray

Toner Cartridges

Samsung SCX-4300 Compatible Black Samsung 1092 Toner Cartridge (Replaces MLT-D1092S/ELS Laser Printer Cartridge) 1.4p per page - 2,000 pages
Samsung SCX-4300 Compatible Toner for Samsung MLT-D109S Black - 2,000 Page Yield

Operating System Compatibility

macOS 14
macOS 13
macOS 12
macOS 11
macOS 10.15
macOS 10.14
macOS 10.13
macOS 10.12
Mac OS X 10.11
Mac OS X 10.10
Mac OS X 10.9
Mac OS X 10.8
Mac OS X 10.7
Mac OS X 10.6
Mac OS X 10.5
Mac OS X 10.4

How to Install Samsung SCX-4300 Driver without an Installation Disk on Mac?

This section will show you how to install Samsung SCX-4300 printer driver on a computer running on Mac OS properly in the absence of an installation disk.

First off, make sure the printer is compatible with the version of the OS currently running on your device. You can find details about this in your printer’s manual.
Get on the website of the printer’s manufacturer to discover supports for the model you own.
Go to the printer section of the manufacturer’s website. If things get overly complicated for you, just type in the model of the printer you own.
Locate the link provided on the page for you to download the software required by the Samsung SCX-4300 printer you own.
Click on the download link to begin downloading process automatically.
If necessary, determine the location on your computer to save the downloaded software later on. Wait while the download commences.
Go to the download folder and double-click on the downloaded file.
Look for the setup file (typically in DMG format) and double-click on the file to run it.
Further instructions will be given onscreen. Make sure you follow all the given instructions.
Connect the printer to your computer. Use the USB cable to check if your computer recognizes the printer. Alternatively, connect the two via Wi-Fi but make sure both your computer and the printer are connected to the internet properly.
Your printer should be readily accessible by now.

How to Install Printer Driver for macOS 10.15 (Catalina)?

Click here to download the latest driver available for Samsung SCX-4300 printer
Make sure to select the correct Mac OS version (10.11/ 10.12/ 10.13/ 10.14) for Mac O.S 10.15. You can select Mac OS 10.14 or 10.11 or 10.13 or later
Download the driver of Samsung SCX-4300 printer
After that, open the folder were located of the download file and Click to open the driver file
If you get the following error message when running it, the gatekeeper needs to be temporally disabled.
You need to open terminal from spotlight
Type the command: sudo spctl --master-disable
Enter the correct password and run the printer driver with extension ".pkg" again.
Once the print driver has been installed, just open the Samsung SCX-4300 Driver with the following folder path and then install the following PKG drivers (ICDM, ScanThru):
- ScannerDriver > Mac_Installer > MAC_ICDM > ICDM.pkg
- ScannerDriver > Mac_Installer > MAC_TWAIN > ScanThru.pkg
After the drivers are installed, you can go to System preferences > Printers & scanners and add the printer clicking on the plus (+) button > Add printer or scanner > Samsung SCX-4300
Make sure to select the specific driver and not AirPrint where it says "USE"
Now, that the Samsung SCX-4300 printer has been added, you should be able to print or scan. If you want to scan, go to system preferences > printers and scanners > and select scan
Enable gatekeeper (Mac security):
- Open terminal from the spotlight
- Typing the command: sudo spctl --master-enable
- Enter your password

Note: Click "View" at the bottom of the table for details.

How to Install Samsung SCX-4300 Driver for macOS 11 Big Sur?

Install macOS 10.15 (Catalina) again
Install the printer
Then update to macOS 11 (Big Sur)
Kept the Samsung SCX-4300 driver installed and still works in macOS 11 (Big Sur).

How to Install Samsung SCX-4300 Driver for macOS 12 Monterey?

Make sure your Samsung SCX-4300 driver is currently on macOS 11 (Big Sur)
Connect your printer machine to Macbook
Then update the driver to macOS 12 Monterey.
Kept the Samsung SCX-4300 driver installed and still works in macOS 12 Monterey.

How do I Install Samsung SCX-4300 Driver for macOS 13 (Ventura)?

Please follow the instructions above “How do I Install Samsung SCX-4300 Driver for macOS 12 (Monterey)?” before following the steps below.

Samsung SCX-4300 driver still running on macOS 12 (Monterey).
Connect the printer to macOS 13 (Ventura).
After that, just update the Samsung printer driver to the macOS 12 (Monterey).
The Samsung SCX-4300 printer driver is installed and works correctly for macOS 12 (Monterey).

How do I Install Samsung SCX-4300 Driver for macOS 14 (Sonoma)?

Follow these steps on your macOS 14 (Sonoma). Don't miss the instructions above before this.

Samsung SCX-4300 driver workaround on macOS 13 (Ventura).
Just plug in a USB cable to connect the SCX-4300 printer with your macOS 14 (Sonoma).
Please update the Samsung printer driver.
Kept the Samsung printer driver installed and still works in macOS 14 (Sonoma).

Also, need: Samsung SCX-4521F Driver Download for Mac

How to Uninstall Samsung SCX-4300 Driver for Mac?

Manual Uninstallation:

End all processes of Apple Samsung SCX-4300 Printer Drivers by accessing Activity Monitor.
Go to Launchpad, find Utilities, and open Activity Monitor. Select All Processes off the dropdown menu and select all processes related to Apple Samsung Printer Drivers. Click the Quit Process option and select Quick.
Use the Trash to delete the application of Apple Samsung SCX-4300 Printer Drivers.
Go to Finder and delete everything associated with Apple Samsung Printer Drivers.
Remove Apple Samsung SCX-4300 Printer Drivers completely by emptying the Trash.

Uninstallation with MacRemover:

Download the MacRemover app and drag its icon to the app folder to install it.
Run the app and choose Apple Samsung SCX-4300 Printer Drivers. Click Run Analysis.
Locate the file into your Mac folder of Apple Samsung Printer Drivers. Select Complete Uninstall and select Yes.

If you want to download Samsung SCX-4300 driver for Mac OS, you must click on the "Download" links that we have provided in the table below. If you find any broken link or some problem with this printer, please contact our team by using the contact form that we have provided.

Operating System	Version	Action
SCX-4300 Series Print and Scan Driver for macOS 14 Sonoma/ macOS 13 Ventura/ macOS 12 Monterey/ macOS 11 Big Sur/ macOS 10.15 Catalina	V3.93	Download
SCX-4300 Series Print Driver for Mac OS X 10.7	V3.00	Download
SCX-4300 Series Print Driver for Mac OS X 10.3/ Mac OS X 10.4/ Mac OS X 10.5 / Mac OS X 10.6	V2.00	Download
SCX-4300 Series Scan Driver for Mac OS X 10.3/ Mac OS X 10.4/ Mac OS X 10.5 / Mac OS X 10.6/ Mac OS X 10.7	V2.01.98	Download